How to Measure for Roller Blinds

We advise using a metal tape measure for accuracy. Measurements should be in MM . Please double-check your measurements.
Slightly smaller no problems.
Slightly larger may mean a return to store for cut down incurring additional cost.

The two scenarios for measuring blinds are:

RECESS OR REVEAL FIT

  1. Inside Recess
    Generally the recess is around 6cm deep, Otherwise the blind will protrude beyond the recess.
  2. Measure width A-B this measurement will be the outside of the brackets in full; do not reduce it. There will be a gap of about 1.5cm between the fabric and the recess wall which will allow some light through, even with a blackout fabric.
  3. Measure drop C-D
  4. Note which side you would like the chain – right or left
  5. Over roll or under roll? ( recommend over rolled)

FACE OR ARCHITRAVE FIT

  1. Measure the width A-B
  2. Measure the drop C-D
  3. Decide which side you would like the chain – right or left
  4. Over roll or under roll? ( recommend over rolled)